Author: dwitt3234

I worked on the seatbelt mount assemblies. I made up the two angles and cut out one of the webs. I previously made the fittings for the assemblies. The fittings still need to be drilled and bent but I will work on that next time.

Today I worked on the two F23-12 clips and completed them.

I cut out two of the channels used in the cross tie box assembly. I used the bench sander to trim the ends of the channel that needs to have the flanges extend 1/8 inches beyond the web.

Today I made the lower cross tie #1.

I continued to work on the cross ties today. I trimmed the angles on the end of upper #2 tie. Next, I cut and trimmed the #3 and #4 upper cross ties.