The wing tip attach angles I made earlier do not seem to fit properly so I’ll make some new ones today so that I can finish the wing tips for the left wing. After making and fitting the new attach angle to the wing tip I proceeded to drill the pilot holes for the counter sunk screws I plan to use. Next I started to make the spacer for the nut plates. With the spacers made I installed the nut plates on the angle. I dimpled for the screws using a countersunk solid rivet just as I did the main spars. This worked well and I installed the wing tip again, this time using screws. The last step is to make an angle for the leading edge to capture the wing tip.
Dave's Sonex Builders Log 
You must be logged in to post a comment.