Month: July 2008

I worked on drilling the second wing spar using the first as a template. This was fairly easy but time consuming. Still, it was easier than all of the layout work that went into the first spar.

Spent more time today getting the other wing spar blank made to size. I’m now ready to setup and start using the first spar as a template to drill the second spar.

I spent a fair bit of time today finishing the layout of the wing spar. Once all the layout was complete I setup my drill press and drilled the pilot holes. I still need to put in the large 1-1/2" hole but the rest of the holes are complete. My next stop will be to clamp it to the blank for the other side of the wing and use it as a template to get all of the holes drilled in that spar.

Working on layout of wing spar.